Looking for:

One moment, please – TOYBOX is a collection of virtual modular synthesis blocks for Reaktor Player.

Click here to Download

ITER (initially the International Thermonuclear Experimental Reactor, iter meaning “the way” or “the path” in Latin) is an international nuclear fusion research and engineering megaproject aimed at creating energy by replicating, on Earth, the fusion processes of the Sun. Upon completion of construction of the main reactor and first plasma, planned for late , it will be the world’s . A collection of free ‘User Blocks’ for use with Reaktor The pack currently includes the ‘Modulation Lane’, ‘Table’, ‘Sequential Switch’, ‘Vintage Sampler’, ‘Macro 8’ blocks and ‘Vintage Verb’. A selection of 8 demo blocks from the toybox packs: Synth Bundle – Piano Roll & FM Synth Designers Pack – Multi-Breakpoint Oscillator & Ramps. buy now demo english manuals getting started getting started. what’s new what is new. diving deeper diving deeper. reaktor factory library manual reaktor 5 documentation english: application reference core reference free shipping* connect with us traktor; native instruments; ni news; newsletter subscription.


Demo Of Native Instruments’ New TRK Reaktor Instrument – ADSR – ULTRA-SHARP SYNTHESIZER


ITER initially the International Thermonuclear Experimental Reactor , iter meaning “the way” or “the path” in Latin [1] [2] [3] is an international nuclear fusion research and engineering megaproject aimed at creating energy by replicating, on Earth, the fusion processes of the Sun. Upon completion of construction of the main reactor and first plasma, planned for late , [4] it will be the world’s largest magnetic confinement plasma physics experiment and the largest experimental tokamak nuclear fusion reactor.

It is being built next to the Cadarache facility in southern France. The long-term goal of fusion research is to generate electricity. ITER’s stated purpose is scientific research, and technological demonstration of a large fusion reactor, without electricity generation. ITER’s thermonuclear fusion reactor will use over MW of electrical power to cause the plasma to absorb 50 MW of thermal power, creating MW of heat from fusion for periods of to seconds. Construction of the ITER complex in France started in , [17] and assembly of the tokamak began in Fusion aims to replicate the process that takes place in stars where the intense heat at the core fuses together nuclei and produces massive amounts of energy in the form of heat and light.

Harnessing fusion power in terrestrial conditions would provide sufficient energy to satisfy mounting demand, and to do so in a sustainable manner that has a relatively small impact on the environment. One gram of deuterium-tritium fuel mixture in the process of nuclear fusion produces 90,kilowatt hours of energy, or the equivalent of 11 tonnes of coal. Nuclear fusion uses a different approach to traditional nuclear energy. Current nuclear power stations rely on nuclear fission with the nucleus of an atom being split to release energy.

Nuclear fusion takes multiple nuclei and uses intense heat to fuse them together, a process that also releases energy. Nuclear fusion has many potential attractions. The fuel is relatively abundant or can be produced in a fusion reactor. After preliminary tests with deuterium, ITER will use a mix of deuterium-tritium for its fusion because of the combination’s high energy potential. The first isotope, deuterium , can be extracted from seawater , which means it is a nearly inexhaustible resource.

On 21 November , the seven project partners formally agreed to fund the creation of a nuclear fusion reactor. The reactor was expected to take 10 years to build and ITER had planned to test its first plasma in and achieve full fusion by , however the schedule is now to test first plasma in and full fusion in The best result achieved in a tokamak is 0. For commercial fusion power stations, engineering gain factor is important.

Engineering gain factor is defined as the ratio of a plant electrical power output to electrical power input of all plant’s internal systems tokamak external heating systems, electromagnets, cryogenics plant, diagnostics and control systems, etc.

Some nuclear engineers consider a Q of is required for commercial fusion power stations to be viable. ITER will not produce electricity. Producing electricity from thermal sources is a well known process used in many power stations and ITER will not run with significant fusion power output continuously. Adding electricity production to ITER would raise the cost of the project and bring no value for experiments on the tokamak.

One of the primary ITER objectives is to achieve a state of ” burning plasma “. No fusion reactors had created a burning plasma until the competing NIF fusion project reached the milestone on 8 August The bigger a tokamak is, the more fusion reaction-produced energy is preserved for internal plasma heating and the less external heating is required , which also improves its Q-value. This is how ITER plans for its tokamak reactor to scale. Preparations for the Gorbachev-Reagan summit showed that there were no tangible agreements in the works for the summit.

However, the ITER project was gaining momentum in political circles due to the quiet work being done by two physicists, the American scientist Alvin Trivelpiece who served as Director of the Office of Energy Research in the s and the Russian scientist Evgeny Velikhov who would become head of the Kurchatov Institute for nuclear research. The two scientists both supported a project to construct a demonstration fusion reactor.

At the time, magnetic fusion research was ongoing in Japan, Europe, the Soviet Union and the US, but Trivelpiece and Velikhov believed that taking the next step in fusion research would be beyond the budget of any of the key nations and that collaboration would be useful internationally. My response was ‘great idea’, but from my position, I have no capability of pushing that idea upward to the President.

This push for cooperation on nuclear fusion is cited as a key moment of science diplomacy , but nonetheless a major bureaucratic fight erupted in the US government over the project.

One argument against collaboration was that the Soviets would use it to steal US technology and expertise. A second was symbolic and involved American criticism of how the Soviet physicist Andrei Sakharov was being treated. Sakharov was an early proponent of the peaceful use of nuclear technology and along with Igor Tamm he developed the idea for the tokamak that is at the heart of nuclear fusion research.

This led to nuclear fusion cooperation being discussed at the Geneva summit and release of a historic joint statement from Reagan and Gorbachev that emphasized, “the potential importance of the work aimed at utilizing controlled thermonuclear fusion for peaceful purposes and, in this connection, advocated the widest practicable development of international cooperation in obtaining this source of energy, which is essentially inexhaustible, for the benefit of all mankind.

As a result, collaboration on an international fusion experiment began to move forward. This meeting marked the launch of the conceptual design studies for the experimental reactors as well as the start of negotiations for operational issues such as the legal foundations for the peaceful use of fusion technology, the organizational structure and staffing, and the eventual location for the project.

This meeting in Vienna was also where the project was baptized the International Thermonuclear Experimental Reactor, although it was quickly referred to by its abbreviation alone and its Latin meaning of ‘the way’. Conceptual and engineering design phases were carried out under the auspices of the IAEA. These issues were partly responsible for the United States temporarily exiting the project in before rejoining in There was a heated competition to host the ITER project with the candidates narrowed down to two possible sites: France and Japan.

In , Australia became the first non-member partner of the project. The ITER Council is responsible for the overall direction of the organization and decides such issues as the budget. There have been three directors-general so far: [77]. ITER’s stated mission is to demonstrate the feasibility of fusion power as a large-scale, carbon-free source of energy. The objectives of the ITER project are not limited to creating the nuclear fusion device but are much broader, including building necessary technical, organizational, and logistical capabilities, skills, tools, supply chains, and culture enabling management of such megaprojects among participating countries, bootstrapping their local nuclear fusion industries.

From to the middle of the s, hundreds of fusion scientists and engineers in each participating country took part in a detailed assessment of the tokamak confinement system and the design possibilities for harnessing nuclear fusion energy. The ITER project was initiated in Ground was broken in [88] and construction of the ITER tokamak complex started in Machine assembly was launched on 28 July When deuterium and tritium fuse, two nuclei come together to form a helium nucleus an alpha particle , and a high-energy neutron.

While nearly all stable isotopes lighter on the periodic table than iron and nickel , which have the highest binding energy per nucleon , will fuse with some other isotope and release energy, deuterium and tritium are by far the most attractive for energy generation as they require the lowest activation energy thus lowest temperature to do so, while producing among the most energy per unit weight.

All proto- and mid-life stars radiate enormous amounts of energy generated by fusion processes. Activation energies in most fusion systems this is the temperature required to initiate the reaction for fusion reactions are generally high because the protons in each nucleus will tend to strongly repel one another, as they each have the same positive charge.

In ITER, this distance of approach is made possible by high temperatures and magnetic confinement. ITER uses cooling equipment like a cryopump to cool the magnets to close to absolute zero. Additional heating is applied using neutral beam injection which cross magnetic field lines without a net deflection and will not cause a large electromagnetic disruption and radio frequency RF or microwave heating.

At such high temperatures, particles have a large kinetic energy , and hence velocity. If unconfined, the particles will rapidly escape, taking the energy with them, cooling the plasma to the point where net energy is no longer produced.

A successful reactor would need to contain the particles in a small enough volume for a long enough time for much of the plasma to fuse. A charged particle moving through a magnetic field experiences a force perpendicular to the direction of travel, resulting in centripetal acceleration , thereby confining it to move in a circle or helix around the lines of magnetic flux.

A solid confinement vessel is also needed, both to shield the magnets and other equipment from high temperatures and energetic photons and particles, and to maintain a near-vacuum for the plasma to populate.

The material must be designed to endure this environment so that a power station would be economical. Once fusion has begun, high-energy neutrons will radiate from the reactive regions of the plasma, crossing magnetic field lines easily due to charge neutrality see neutron flux.

Since it is the neutrons that receive the majority of the energy, they will be ITER’s primary source of energy output. The inner wall of the containment vessel will have blanket modules that are designed to slow and absorb neutrons in a reliable and efficient manner and therefore protect the steel structure and the superconducting toroidal field magnets.

Energy absorbed from the fast neutrons is extracted and passed into the primary coolant. This heat energy would then be used to power an electricity-generating turbine in a real power station; in ITER this electricity generating system is not of scientific interest, so instead the heat will be extracted and disposed of.

The vacuum vessel is the central part of the ITER machine: a double-walled steel container in which the plasma is contained by means of magnetic fields. The ITER vacuum vessel will be twice as large and 16 times as heavy as any previously manufactured fusion vessel: each of the nine torus -shaped sectors will weigh approximately tons for a total weight of tons. When all the shielding and port structures are included, this adds up to a total of 5, tonnes.

Its external diameter will measure Once assembled, the whole structure will be The primary function of the vacuum vessel is to provide a hermetically sealed plasma container.

Its main components are the main vessel, the port structures and the supporting system. The main vessel is a double-walled structure with poloidal and toroidal stiffening ribs between millimetre-thick 2. These ribs also form the flow passages for the cooling water.

The space between the double walls will be filled with shield structures made of stainless steel. The inner surfaces of the vessel will act as the interface with breeder modules containing the breeder blanket component. These modules will provide shielding from the high-energy neutrons produced by the fusion reactions and some will also be used for tritium breeding concepts.

The vacuum vessel has a total of 44 openings that are known as ports — 18 upper, 17 equatorial, and 9 lower ports — that will be used for remote handling operations, diagnostic systems, neutral beam injections and vacuum pumping. Remote handling is made necessary by the radioactive interior of the reactor following a shutdown, which is caused by neutron bombardment during operation. Vacuum pumping will be done before the start of fusion reactions to create the necessary low density environment, which is about one million times lower than the density of air.

ITER will use a deuterium-tritium fuel, and while deuterium is abundant in nature, tritium is much rarer because it is a hydrogen isotope with a half-life of just This component, located adjacent to the vacuum vessel, serves to produce tritium through reaction with neutrons from the plasma. There are several reactions that produce tritium within the blanket. ITER is based on magnetic confinement fusion that uses magnetic fields to contain the fusion fuel in plasma form.

The magnet system used in the ITER tokamak will be the largest superconducting magnet system ever built. The 18 toroidal field coils will also use niobium-tin. They are the most powerful superconductive magnets ever designed with a nominal peak field strength of There will be three types of external heating in ITER: [].

The ITER cryostat is a large 3,tonne stainless steel structure surrounding the vacuum vessel and the superconducting magnets, with the purpose of providing a super-cool vacuum environment. The divertor is a device within the tokamak that allows for removal of waste and impurities from the plasma while the reactor is operating.

At ITER, the divertor will extract heat and ash that are created by the fusion process, while also protecting the surrounding walls and reducing plasma contamination.


Post a Comment

Your email address will not be published. Required fields are marked *